April 25, 2011
I wanna make small rc model airplanes what step should i take?
There are a lot of possibilities depending on your budget and what equipment you have now. Assuming you need everything and have a small budget:
1) You first will need a reliable radio. Most model planes have four functions, so a 4ch radio is a good start. You can find many good used radios available through local classified as well as sites like eBay. Stick with a name brand like JR, Futaba, or Hitec and you will have a decent radio to start. Be sure it is 27mhz, 72mhz, or 2.4mhz (in the United States) so it is legal for aircraft use. You will also need a compact light receiver and small 'park size' servos. For a typical small 4ch aircraft (electric) you will need 3-4 small servos.
2) You will need a plan or a guide of what size, type, and design of plane. It is best for your first plane to use a known plan that flies well. There are many people who have built small models from foam as it assembles easy, is easy to work with, and inexpensive. Some great designs can be found on the web that also show you what motor you need. The least expensive easy way to start with a small model is electric power.
3) Power system, the plans should indicate what motor, speed control (ESC), prop, and battery will be required. These can be found at on-line sites, local hobby stores, or classified ads. Buying from a local store is a great source of advice as well. Many large hobby shops are available through mail order like horizonhobby.com and towerhobbies.com
4)Most plans have decent assembly instructions, especially if you use an on line forum for the plans and build. Follow the guidelines and be sure to use a glue that is compatible with foam if that's what you are using. If you intend to fly the plane, make sure you either have experience flying R/C planes or get someone to help you at a local club.
Filed under RC Model Airplane by Lee
Comments on I wanna make small rc model airplanes what step should i take? »
Buy a kit.
References :
There are a lot of possibilities depending on your budget and what equipment you have now. Assuming you need everything and have a small budget:
1) You first will need a reliable radio. Most model planes have four functions, so a 4ch radio is a good start. You can find many good used radios available through local classified as well as sites like eBay. Stick with a name brand like JR, Futaba, or Hitec and you will have a decent radio to start. Be sure it is 27mhz, 72mhz, or 2.4mhz (in the United States) so it is legal for aircraft use. You will also need a compact light receiver and small 'park size' servos. For a typical small 4ch aircraft (electric) you will need 3-4 small servos.
2) You will need a plan or a guide of what size, type, and design of plane. It is best for your first plane to use a known plan that flies well. There are many people who have built small models from foam as it assembles easy, is easy to work with, and inexpensive. Some great designs can be found on the web that also show you what motor you need. The least expensive easy way to start with a small model is electric power.
3) Power system, the plans should indicate what motor, speed control (ESC), prop, and battery will be required. These can be found at on-line sites, local hobby stores, or classified ads. Buying from a local store is a great source of advice as well. Many large hobby shops are available through mail order like horizonhobby.com and towerhobbies.com
4)Most plans have decent assembly instructions, especially if you use an on line forum for the plans and build. Follow the guidelines and be sure to use a glue that is compatible with foam if that's what you are using. If you intend to fly the plane, make sure you either have experience flying R/C planes or get someone to help you at a local club.
References :
great source for small foam R/C plane plans: http://www.rcgroups.com/foamies-scratchbuilt-428/
great source for inexpensive small electric power systems: http://www.hobbypartz.com/